The best solution to solve the problem of impurities in hydraulic oil.

Hydraulic systems are the most important parts of the mechanical machine. For those who need to use this kind of machine in their work, You can find the problem as the hydraulic oil was full of impurities fractures. And this can directly lead to damage to the hydraulic system. 

Examples like…

Solid – dust, metal residues, Zn substances.

Liquid – most contaminants are “water” leaking from the oil cooler system

Gas – a problem when the hydraulic pump is still running and accidentally sucks air into the engine system.

Heat – high temperature caused by high-pressure oil and friction in the hydraulic system. This leads to deterioration of the oil and damage to the engine.

These factors have a direct effect on the hydraulic system and cause extensive damage. Machine manufacturers must pay attention to this situation and should develop systems to deal with these problems, Including oil coolers, oil filters, etc. 

IDEMITSU has recognized this problem and therefore developed and researched a solution to solve this problem. It’s called “Daphne Super Hydro A (zinc-free and heat-resistant)” The hydraulic oil is made from the base oil “G.II”, which has the properties to withstand high temperatures, and additives are used that do not contain zinc as a component. Prevents sludge formation and has an anti-wear effect, Prevents rust and separates from water. It can work very well with a hydraulic system in any type of engine, Especially the control system that uses a “servo valve” that requires high oil purity.